Modeling Tools, Clay, Wax, Casting Material, Books

Size and Approximate Weight Key
Le Beau Touché & NSP Clay 1 Block ~ 2 lbs 1 Case ~ 40 lbs	J.F. McCaughin Classic Clay 1 Slab ~ 10 lbs 1 Case ~ 50 lbs
All Clay weights are approximate. Actual weight may increase estimated shipping charge.

Joker
www.roccotartamella.com

Gladiator
by Seth Vandable

Cable
by Claudio Setti

Castiline Modeling Compound
from Chavant

Models like clay
Works like wax
3 Hardnesses
Self supporting without armature
Lightweight; 40% lighter than Plasteline
Hard grade for armatures and sharp detail
Medium grade for detailing and modeling
Soft grade works like clay
Non polymerizing
Sulfer Free
Is compatible with silicones and other rubbers

Working with Castilene
Hard Castilene will remain malleable while working if kept warm. All three hardness are compatible with one another. Hard Castilene can be used as an armature and soft or medium Castilene can be applied on top of the hard. All generic wax tools and wax carving methods are compatible with Castilene. Heat tools before carving. Chill Castilene to achieve optimum hardness for high detail and burnishing.

NSP
(Non Sulphurated Plasteline)

NSP is a line of professional, sulphur free sculpting clays. Replacing sulfur minimizes difficulties associated with mold making with silicone rubber. Can be melted or poured at approximately 185° F. Available in soft, medium, and hard, green, brown, or tan (available in soft or medium only).

1 Block $9.50ea ($4.75/lb)
1 Case $172.00ea ($4.30/lb)
6+ Cases $168.00ea ($4.20/lb)

Le Beau Touché and
Le Beau Touché High Melt

Le Beau Touché is a sulfur free, extremely smooth and flexible plasteline with exceptional adhesive qualities. The high melt (HM) formula is less sensitive to heat variations and is suggested for use where the working environment is expected to exceed 90° F. HM is slightly firmer and less tacky than the original Le Beau Touché. Available in green, cream, and brown.

1 Block $9.50ea ($4.75/lb)
1 Case $172.00ea ($4.30/lb)
6+ Cases $168.00ea ($4.20/lb)

J-Mac Classic Clay - 2AB200 Series

The original no sulfur J.F. McCaughin (J-Mac®) Classic® Clay for professional sculptors is available in three hardnesses and two different colors. It is easy to work with, requires the minimum in armature support. It is the worldwide favorite of sculptors. This clay is compatible with many molding rubbers, and will not cause a problem during the mold making process. Soft available in Tan only.

1 Slab $35.00ea ($3.50/lb)
1-4 Case $162.50ea ($3.25/lb)
5-9 Cases $152.50ea ($3.05/lb)
10+ Cases $147.50ea ($2.95/lb)

Apoxie Sculpt

Designed for creating special effects, filling in cracks and seams, bonding pieces together, fabricating parts, creating dioramas, and creating relief maps. Available in black, bronze, cream, and white. Colors available by special order.

Water Based Clay

This water based clay is moist clay that you add water to. It is used to clay up molds. Sculpt - hand build or use on a wheel and no grog.

CT-3 - Cone 06-02 (Smooth white)
Raku - Cone 06-04 (Low fire)