Patina Chemicals and Solutions
Bismuth Nitrate	.25 lb	$19.95		Sodium Thiosulfate	1 lb	$43.95
Cupric Chloride	1 lb	$28.95		Sodium Thiosulfate	.25 lb	$13.95
Cupric Chloride	.50 lb	$13.95		Silver Nitrate	10 g	$25.00
Cupric Nitrate	1 lb	$28.95		Sulfurated Potash	500 g	$74.95
Cupric Nitrate	.25 lb	$7.95		Sulfurated Potash	100 g	$16.95
Ferric Nitrate	1 lb	$38.95		Sulfurated Potash	2oz	$9.00
Ferric Nitrate	.25 lb	$10.95		Zinc Nitrate	.25 lb	$12.95
Collidial Silica	3 oz. liquid	$3.75		Zinc Nitrate	1 lb	$47.95

Oxide Powders Dry powder tints for use in cement, plaster, wax, and various casting materials.
Price Per Ounce:			Price Per Pound:
Black	$2.25		Black	$11.50
Burnt Sienna	$2.25		Burnt Sienna	$11.50
Burnt Umber	$2.25		Burnt Umber	$11.50
Green (Chromium Oxide)	$3.25		Green (Chromium Oxide)	$14.50
Raw Sienna	$2.25		Raw Sienna	$11.50
Red	$2.25		Red	$11.50
Titanium White	$2.25		Titanium White	$11.50
Ultramarine Blue	$2.95		Ultramarine Blue	$13.50
Ultramarine Violet	$4.50		Ultramarine Violet	$19.50
Brilliant Gold	$4.95
Cobalt Blue	$7.00
Hi-Lite Pearl	$5.25
Milori Blue	$4.50
Orange	$2.25
Yellow	$2.25
Cadium Red	$3.50

Metallic Pigments Provides a faux metal finish when combined with Forton MG or polyurethane resins. Will not take patinas. Available in Rich Pale Gold, Brilliant Copper, Antique Brass, Statuary Bronze, Brilliant Aluminum, Silverstone, and Antique Silver.

1 Ounce  $6.99  Color #77    Rich Pale Gold #104   Brilliant Copper #805   Antique Brass #661   Statuary Bronze #242   Brilliant Aluminum #2025 Silverstone             Antique Silver

Verdigris Green Patina Chemicals Mixture of cupric chloride (100 g), ammonium chloride (25 g), and water creates an aged greenish/blue look when applied to copper or bronze. The solution is to be applied cold. According to the ratio of chemicals, solution can be made to look more blue or green. Makes a 32 ounce solution.
		$14.95

Birchwood Casey Liquid Patinas All are packaged in a concentrated form - dilute up to 50% with distilled water. # Name Type Description M-38 M-24 M-20 A-14 A-15 PC-9 Antique Brown Antique Black Antique Black Aluma Black Aluma Black Presto Black Immersion, Spray or Brush Spray or Brush Immersion Spray or Brush Immersion Immersion, Spray or Brush Brown for Bronze, Brass, & Copper Black for Bronze, Brass, & Copper Black for Bronze, Brass, & Copper Black for Aluminum Black for Aluminum Gun Bluing for Iron & Steel
M-38 8 oz   $15.00 32 oz   $39.00 1 gal   $109.00 5 gal   $386.00	A-14 8 oz   $15.00 32 oz   $39.00 1 gal   $135.00 5 gal   $506.00
M-24 8 oz   $15.00 32 oz   $39.00 1 gal   $135.00 5 gal   $506.00	A-15 8 oz   $15.00 32 oz   $39.00 1 gal   $125.00 5 gal   $420.00
M-20 8 oz   $15.00 32 oz   $39.00 1 gal   $130.00 5 gal   $420.00	PC-9 8 oz   $15.00 32 oz   $39.00 1 gal   $131.00 5 gal   $480.00
Birchwood Casey Gels For use on vertical surfaces, also helps to make a more even patina. Name Type Description Antique Brown® Antique Black® Presto Black® Gel Gel Gel Brown for Bronze, Brass, & Copper Black for Bronze, Brass, & Copper Black for Iron & Steel (Gun Bluing) 8 oz   $15.00 32 oz   $39.00 1 gal   $136.00 5 gal   $506.00   Color Antique Brown® Antique Black® Presto Black®

Water Base Dye Oxide Patina Colors The Dye Oxide patinas do not contain acids; they are UV safe, indoor, or outdoor oxides. These patinas may be applied hot or cold to any metal including iron, steel, and aluminum without causing rust. They are best applied hot; they do not react with the metal. The color of these patinas will remain the same; they will not change as with an acid patina. The metal surface needs to be clean before application. The Dye Oxide patinas are more transparent than the Universal patinas.

8 oz        $14.00 32 oz      $43.00 1 gal       $99.00   Color Violet Blue Blue/Green Green Green/Blue Stealth Green Pea Green Yellow Orange Red Brown Black White

Traditional Brown Patinas from Sculpt Nouveau Prices 8 oz $13.00 32 oz $29.00 1 gal $69.00 5 gal $311.00 Ferric Nitrate is a hot patina for bronze, brass, and copper. In addition, it is often used to rust iron and steel. Ferric Nitrate/Ferric Chloride is a hot patina for bronze, brass, and copper. Japanese Brown is a brown patina for iron and steel, which may be applied hot or cold. This patina will create a golden color on bronze, brass, and copper. Tan is a patina for all metals and may be applied hot or cold. Potassium Dichromate is an interesting orange patina for bronze, brass, and copper. Also, when diluted, Potassium Dichromate may be used as a stop out for rust on iron and steel. Deep Brown is a beautiful mahogany/brown patina for bronze, brass, and copper. Mahogany is a patina best used on copper. When used on a polished surface, a beautiful transparent brown patina will form with swirls of color. On a non-polished surface, a nice brown will appear. On bronze or brass, this patina turns a nice brown. Mahogany works well as a base patina under traditional greens or blues as it will make these colors more vibrant. In addition, Mahogany is one of the few patinas that will react with stainless steel, resulting in a gray color. Antiquing patina beautifully and easily ages bronze, brass, copper, iron, and steel. Darkening patina is great for aging or darkening the Metal Coatings or cold cast/resin materials, yet it will darken all other metals as well. This patina will create a beautiful transparent brown on iron and steel. Ron Young details the application process for many of these traditional brown patinas in his series of free video lessons. Color   Ferric Nitrate Ferric Nitrate/Ferric Chloride Japanese Brown Tan Darkening Deep Brown Mahogany Potassium Dichromate Antiquing Copper Sulfate Bismuth White    Size   8 oz 32 oz 1 gal 5 gal

Traditional Blue Patinas from Sculpt Nouveau Prices 8 oz $13.00 32 oz $29.00 1 gal $69.00 5 gal $311.00 Cupric Nitrate is a hot patina for bronze, brass, and copper, which creates a blue/green beautiful finish. Powder Blue is a cold patina for bronze, brass, and copper. This patina is a stable blue and a good choice for outdoor work. Indoor Blue patina is strictly for indoor use only. It should be applied using the same procedure as the traditional light green patina. Color   Indoor Blue Powder Blue Cupric Nitrate    Size   8 oz 32 oz 1 gal 5 gal

Traditional Green Patinas from Sculpt Nouveau Prices 8 oz $13.00 32 oz $29.00 1 gal $69.00 5 gal $311.00 Light Green Patina is a cold patina for bronze, brass, and copper. Apply to a clean, cold (65°-70°F) metal. It will take 2-12 hours to completely react with the metal. Mint Green is a patina for bronze, brass, and copper that may be applied hot or cold. This patina will create a beautiful green while in the full sun and is recommended when working outdoors on copper roofs and gutters. Tiffany Green is a cold patina for bronze, brass, and copper. It may be used both indoors and outdoors. If used outdoors, Tiffany Green should be applied in the shade. Once the patina has developed it may be placed in full sun. Tiffany Green will create a bright orange rust on iron and steel. Color   Light Green Tiffany Green Mint Green    Size   8 oz 32 oz 1 gal 5 gal

Traditional Black Patinas from Sculpt Nouveau Prices 8 oz $15.00 32 oz $37.00 1 gal $107.00 5 gal $480.00 Slate Black Patina is a versatile and unique finish for use on iron, steel, stainless steel, aluminum, bronze, brass, or copper. Applied hot, Slate Black will create a deep brown patina on aluminum and a red-green finish on stainless steel. On iron, steel, and nonferrous metals, Slate Black will form a black patina when applied cold. Before applying this patina, sandblasting or sanding is required to clean the surface of oil, oxides, and residues. Slate Black may be applied as a spray or in an immersion process. Depending on the application method chosen, the results will range from a uniform solid color to a layered textured appearance. Slate Black Patina may be diluted up to 50% with distilled water depending on the desired strength of finish. The finish may be burnished wet or dry. Additional patinas can be layered over a Slate Black base. When dry, protect the finish with multiple coats of a clear sealer. In his ongoing series of free video lessons, Ron Young demonstrates the Slate Black Patina application process on bronze cold cast resin. Black Magic Patina instantly creates a beautiful rich black patina on clean iron & steel. Rust will not occur immediately as with other darkening patinas. Water rinsing is a good neutralizer and will not cause rust. Rust will occur after 12 hours if a clear sealer is not applied. Black Magic will darken bonded bronze, brass, and copper castings as well as Sculpt Nouveau’s Metal Coatings to an orange-black color. Black Magic creates a beautiful brown-black patina on cleaned bronze, brass, and copper. Stainless Black Patina is made to create a black patina finish on stainless steel. Color   Slate Black Black Magic Stainless Black    Size   8 oz 32 oz 1 gal 5 gal

Patina Kit from Sculpt Nouveau Just the patinas. A sample of all the Patinas and Dye-Oxide colors Sculpt Nouveau has to offer in four ounce containers. Plus metal cleaner, Permalac Lacquer, Sculpt Nouveau's Sealer, and the New Sculpt Nouveau Wax. Instructions are included.

Patina Kit $225.00

Traditional Rainbow Patina Traditional Rainbow Patina creates a very interesting finish. Depending on the application method and the metal used, many different finishes can be created using this patina. For best results, apply to a shiny and clean metal surface. This patina does not work with the Metal Coatings. Brass: Clean metal with IMS Metal Cleaner (do not sandblast). Apply two coats of Rainbow Patina to hot metal (200-220°F). Additional coats will bring more silver colors. Wash while hot for brightest colors. When dry, protect the finish with 2 coats of Clear Guard. Copper: Clean metal with IMS Metal Cleaner (do not sandblast). Apply 1-2 coats of Rainbow Patina to hot metal (200-220°F). Do not wash. When dry, protect the finish with 2 coats of Clear Guard. The color will continue to develop for 1-2 days. Cold Rolled Steel: Clean metal with IMS Metal Cleaner (do not sandblast). Apply Rainbow Patina to hot metal (200-220°F). Wash while hot. When dry, protect the finish with 2 coats of Clear Guard. Stainless Steel: Clean metal with IMS Metal Cleaner (do not sandblast). Apply many coats of Rainbow Patina to hot metal (200-220°F). Wash while hot. When dry, protect the finish with 2 coats of Clear Guard.

8 oz        $13.00 32 oz      $29.00 1 gal       $69.00 5 gal     $311.00

Universal Patina Solutions Universal Patina solutions come in a wide range of colors. They do not contain acids; they are UV safe, indoor or outdoor oxides. Universal patinas may be used on all metals and the Metal Coatings. They may be blended with each other or any other type of patina. Universal Patinas are non-reactive, UV safe and do not contain acids. They adhere best to warm metal (180-200°F) but may also be applied to cold metal. The Universal Patinas bind on to the metal surface, they do not react. The color of these patinas will remain the same; they will not change as with an acid patina. The metal surface needs to be clean before application. These patinas may be used together with other patinas and dye oxides.

8 oz        $12.00 32 oz      $29.00 1 gal       $50.00 5 gal     $226.00   Color Blue Green Verde Green (iron/steel) Verde Green (bronze/brass/copper) Yellow Red Rust Burgundy Brown Black ZINC/Universal

Vista Series Patina Solutions Vista patinas are a two part patina combined in one solution. The base patina is a blend of chemicals that produce a beautiful green on bronze, brass, and copper, or an exquisite rust on iron & steel. Added to this base solution are different colored oxides which will blend with the first reaction to form a marbled patina. For example, using the vista black on bronze would produce a green and black patina and a rust and black patina on iron.

Size 8 oz       $17.00 32 oz     $48.00 1 gal      $75.00 5 gal    $338.00   Color   Vista Blue Vista Green Vista Yellow Vista Rust Vista Red Vista Burgundy Vista Brown Vista Black

Smart Stain Smart Stain is a strong, non-hazardous, fast drying, transparent patina system. It has no VOC and no odor. Smart Stain works on any metal or substrate as well as over patinas and other oxides. Smart Stain is made by combining finely ground, naturally occurring colored oxides with a water base polymer/resin binder. It is sold concentrated and may be diluted with distilled water up to 25% to increase transparency. Only Smart Coat 1K should be used to dilute any further. For exterior applications, Smart Stain should be sealed with three layers of Smart Coat 1K (with a one hour drying time between each layer). Smart Stain contains UV inhibitors and will not fade outdoors if maintained properly. Maintenance requirements will vary by location. In most environments, regular application of a wax or oil is sufficient to maintain this finish.

Size 8 oz       $17.00 32 oz     $58.00 1 gal    $221.00 5 gal    $996.00   Color   Black Brown Orange Stealth Green White Blue Green Pea Green Verde Yellow Blue-Green Green-Blue Red Violet

Solvent Base Dye Colors Use the solvent dyes directly on any metal or material, including glass. They may be used to duplicate a patina or apply over a patina to alter or enhance the color. The dyes will tint resins, epoxies, lacquers, and waxes. For indoor or outdoor use on all metals and metal coatings.

1 oz       $12.00 4 oz       $26.00 8 oz       $51.00 16 oz    $96.00   Color Violet Blue Green Blue-Green Yellow Orange Red Brown Black White    Solvent Based Dye Thinner 4 oz       $13.00 8 oz       $21.00

Patina Stain from Sculpt Nouveau Patina Stains are blended to match chemical or traditional patinas, but are easier to apply and manage. Because the Patina Stains include a blend of our Solvent Dyes and Permalac sealer, they are UV stable. These stains may be sprayed, brushed, or rubbed on any metal. They may be thinned to produce a lighter shade. One gallon of Patina Stain covers approximately 300 sq/ft. For best results, over-spray with Permalac after application. The stains are available in Verde (copper green), Black (looks like gun bluing or PC9), and Brown (oil rubbed bronze). They are also available in normal and environmentally friendly formulas. The environmentally friendly formula has lower VOC, no solvent odor, and may be thinned with Permalac EF or acetone.

16 oz Aerosol Can    $31.00    Color Black Brown    Size 8 oz   $17.00 16 oz   $31.00 32 oz   $58.00   Color Verde Black Brown    Environmentally Friendly (low VOC. no solvent smell) 8 oz   $19.00 16 oz   $34.00 32 oz   $64.00   Color Verde Black Brown

Metal Rub Patinas may be applied to these rubs because they contain real metal. Apply with a soft cloth to the metal. Buff with a soft cloth after 3 hours. Do not apply lacquer for 24 hours or more. Apply only thin layers of lacquer.

8oz  Color Bronze Brass Copper Silver   $19.00

Finish Kit for Iron from Sculpt Nouveau From start to finish, everything you will need to experiment on iron, steel, or aluminum. This kit includes eight-ounce containers of Metal Cleaner, Permalac Lacquer (with corrosion inhibitor for Iron & Steel added), and Sculpt Nouveau's Water Base Sealer. Four-ounce size containers of Primer, Metal Coatings, Patinas, Birchwood Casey products, and Dye Oxides, as well as an eight ounce container of the new Metal coating C. Two-ounce size containers of Iridescent Powders, and our new wax for Iron & Steel in both clear and a color. A Solvent Dye sample and Dye Thinner is also included. Easy to follow instructions.

Finish Kit for Iron $240.00

	Linzer Brushes Type 7562. Excellent for the application of patinas. All have natural bristles.
	#3 with 2" bristles	$8.45
	#5 with 2 1/2" bristles	$8.95

			Chip Brushes Wooden handle chip brushes. 100% China Bristle available in various widths.
1/2"	$.35 ea		1/2" Box of 36	$11.50
1"	$.45 ea		1" Box of 36	$11.50
1 1/2"	$.50 ea		1 1/2" Box of 36	$15.50
2"	$.75 ea		2" Box of 36	$16.50
3"	$1.05 ea		3" Box of 12	$9.95

Acid Brushes 1/2" wide disposable brushes with a tin handle. Made with horsehair bristles.
	$0.40 ea
	Box of 144 $28.00

Crown Sprã-tool Spray Gun The crown sprayer is powered by an aerosol propellant and is great for a fine smooth mist. Moreover, it can also be used with lacquers, dyes, and acid patinas. Can be used to spray: Lacquers Varnishes Stains   Oil-Based Water-Based Lubricants   Cleaners Multi-colored spatter coatings Two interchangeable spray tips enclosed for low and high viscosity liquids. Controlled spray pattern provides even coverage. No wires, hoses, batteries, bulky compressors or pumps. Includes replaceable Power-Pack

$16.00

3M Scotch Brite Pads Excellent product for hand finishing and cleaning wood, metals, and composites. Available in #96 green (coarse), #86 green (thick and coarse), red (medium), gray (fine), and white (extra fine).
	#96 Green	Each     $0.75 Box of 20   $12.50
	#86 Green	Each     $1.75 Box of 12   $21.95
	Red	Each     $1.25 Box of 20   $21.95
	Gray	Each     $1.35 Box of 20   $22.95
	White	Each     $1.35 Box of 20   $22.95

	Tripoli Buffing Compound Water based buffing and polishing compound. Available in one pound blocks. Great for the cold cast materials. Use with a buffing wheel to get beautiful high polish metal finish.
	Red $5.75

4" Buffing Wheel 4" cotton wheel with a 1/4" shank. Fits on the end of any drill. Works great with Tripoli, green rouge, and black rouge buffing compounds.
		$5.75

	5 Pc. Buffing & Polishing Kit Kit Includes... 3 Buffing Wheels: 2", 3" and 4" 1 oz Red Polishing Compound 1 oz White Polishing Compound
	$10.95

	Solvent Dispensing Can Plunger Can for dispensing flammable liquid features brass flame arrestor screens and pump assembly. Simply press a cloth or wiper on the plunger to moisten. Two-quart capacity.
		$75.00

Permalac Lacquer Permalac is a clear air-dry lacquer that is designed for exterior protection of surfaces of steel, aluminum, copper, silver and bronze at higher temperatures. Permalac contains inhibitors for UV and corrosion protection. It has been found that even a blow torch could not discolor a brass fitting protected by Permalac! In a recent field test, Permalac outperformed 6 other coatings including Syncrylac in protecting steel surfaces. It should give satisfactory exterior protection for at least ten years under normal conditions. Considerably longer life is expected. For brush application, it is ready to use. For spray application, thinner must be used. Permalac air dries to the touch in less than 5 minutes; may be force dried faster at 250°F. Air dries hard in an hour or so, depending on the film thickness, temperature, and other conditions. A remarkable interior and exterior coating which is air-dried and provides a glossy, crystal clear, highly durable finish. Originally developed as a protective finish for copper, brass and bronze, Permalac has also been used successfully on steel, wood, terracotta and concrete. It is weatherproof, and resistant to both ultraviolet light and salt air atmospheres.

12 oz Aerosol    $21.00 32 oz    $43.00 1 gal    $80.50 5 gal    $371.25    Finish Satin Flat    Environmentally Friendly (low VOC. no solvent smell) 16 oz Spray    $27.00 32 oz    $46.50 1 gal    $94.00 5 gal    $399.00    Finish Satin Flat

Clear Guard Size Price 8 oz $13.00 12 oz Spray can $16.00 Case 12 Spray cans $173.00 32 oz $34.00 1 gal $70.00 5 gal $315.00 5 gal Eco $325.00 Clear Guard is a crystal clear, durable, air drying lacquer that results in a hard, fast drying, and tarnish resistant film. It has excellent adhesion to bronze, brass, copper, and other metals as well as to patinas and rusted metal. Clear Guard is suitable for use with all types of application equipment. Once thinned, it may be used with sprayers. Because of its unique chemistry, orange peel is virtually non-existent. Clear Guard is UV stable and highly resistant to weather, water, and chemical damage. It also resists marring and perspiration better than most solvent lacquers. Clear Guard is made in both normal and environmentally friendly formulas. It is sold in 12oz. spray cans or 8oz., 32oz., 1 gal., and 5 gal. containers. Clear Guard is also available in a pre-thinned, ready to spray formula in 32oz., 1 gal., and 5 gal. containers. Clear Guard 12oz. spray cans are only shipped by ground. Shine: Matte/Flat or Satin/Gloss Class: Normal or Environmentally Friendly

Spray Can Finish Matte/Flat Satin/Gloss Size 12 oz Case of 12 Liquid Finish Matte/Flat Satin/Gloss Size 8 oz 32 oz 1 gal 5 gal Pre-thinned Finish Matte/Flat Satin/Gloss Size 32 oz 1 gal 5 gal Spray Can Eco Friendly Finish Matte/Flat Satin/Gloss Size 12 oz Case of 12 Liquid Eco Friendly Finish Matte/Flat Satin/Gloss Size 8 oz 32 oz 1 gal 5 gal Pre-thinned Eco Friendly Finish Matte/Flat Satin/Gloss Size 32 oz 1 gal 5 gal

Smart Coat Smart Coat 1K is an easy to use urethane/resin sealant for all metal surfaces. Once dry, it forms a durable top coat that resists UV damage, humidity, abrasion, and corrosion. Smart Coat 1K has zero VOC, no odor, and is non-hazardous. It may be thinned with water. Smart Coat 1K is terrific over polished metal, rust, and other patina finishes. It does not tend to change the color of a patina unlike solvent clear coats. Smart Coat 1K is available in 8oz., 32oz., 1 gal., and 5 gal. containers in both satin and flat finishes. It is best applied using a spray bottle. One gallon typically covers 250 square feet. Smart Coat 2K is a satin, crystal clear, air-drying two part lacquer designed to provide the best and strongest protection for most surfaces and finishes. Use Smart Coat 2K on your toughest jobs such as counter tops, fountains, or ocean environments. It works extremely well on all metals, wood, terracotta, ceramics, and concrete. Smart Coat 2K provides unusually strong under-film tarnish protection, superior resistance to UV light, and remarkable protection in salt air environments. Smart Coat 2K is available in 16oz., 32oz, 1 gal., and 5 gal. sizes in both satin and flat finishes. It is packaged with detailed instructions and filters for mixing. One gallon typically covers 250 square feet.

Smart Coat 1K   8 oz    $14.00 32 oz    $37.00 1 gal    $76.00 5 gal    $339.00    Shine Satin/Gloss Matte    Smart Coat 2K   16 oz    $26.00 32 oz    $37.00 1 gal    $76.00 5 gal    $339.00    Shine Satin/Gloss Matte

G.J. Nikolas 8321 Lacquer For exterior uses that demand moisture, stain, and wear resistance. 8321 Lacquer offers UV protection. Specified for use with brass, copper, and bronze. Aerosol can contains no fluorocarbon propellants.

12 oz Aerosol Can   $15.95

G.J. Nikolas 11565 Lacquer For exterior uses that demand moisture, stain, and wear resistance. 11565 Lacquer also offers UV protection. For use with brass, copper, and bronze. Product is used with G.J. Nikolas Lacquer Dyes for beautiful translucent colors. Available in 1 and 5 gallon containers. 5 gallon container only available for in store pickup.

1 gallon   $64.95   5 gallons $245.00 (In Store Pickup Only)

G.J. Nikolas Lacquer Dye Concentrated lacquer dye that is available in a variety of colors:red, lemon yellow, canary yellow, gold, black, brown, green, and blue. Apply to pieces to conveniently color and seal them simultaneously. Two ounces of dye should be added to one gallon of lacquer. Eyedroppers are available to control the amount of lacquer dye
	Color Red Lemon Yellow Canary Yellow Gold Black Brown Green Blue 2 oz   $6.95
	Eyedropper	$0.75

Paste Wax Restores, enriches, and protects a wide variety of materials. Available in clear. Often used hot on bronze for sealing.
	Trewax	$9.50
	Johnson's	$8.75

	Renaissance Wax Wax Polish - Museum quality wax contains no acids. It is a highly protective wax and moisture resistant. Good for metal, stone, wood, and paper. Apply in thin layers and polish for a beautiful luster.
	200 ml	$26.95

Heavy Duty Metal Degreaser from Sculpt Nouveau Full Strength-ready to use, quickly dissolves grease, dirt, and oxidation from metal surfaces. Recommended for cleaning metal surfaces prior to applying patina solutions.
	32 oz.	$11.00
	1 gal	$21.00