Forton MG & GFRC
Accelerator
The typical mold cycling time for Forton MG is approximately 60 to 90 minutes. That time can be significantly decreased with the use of an accelerator. Mix 1 pound of dry accelerator with 1 gallon of water to create 1 gallon of accelerator solution.
.5 lb  
$2.50  
Dry Resin
Dry Resin is added to the Forton MG system to provide additional moisture resistance.
lb  
$33.75  
50 lb bag  
$327.00  
FGR-95 Gypsum
Hydrocal®FGR-95 is alpha hemi-hydrate gypsum with a low water/gypsum ratio. Ideal for casting and mother molds.
1 Bag 50 lb  
$46.85  
Hardener
Forton MG Hardener, ammonium chloride, is added as a pH adjuster to insure proper cross-linking of the VF-812 and the dry resin. 110 grams or approximately 4 oz. is used in a 50 pound mix of dry blend.
1 lb  
$7.00